How Do I Remove My Delta Bathroom Sink Stopper

How to Remove Your Delta Bathroom Sink Stopper

If your Delta bathroom sink stopper is stuck or clogged, you may need to remove it to clean or replace it. Fortunately, removing a Delta bathroom sink stopper is a relatively easy task that can be completed in a few simple steps.

Before you begin, gather the following tools:

A pair of pliers
A screwdriver
A rag or towel

Once you have your tools, follow these steps:

1. Turn off the water supply to your sink. This will prevent water from leaking out when you remove the stopper. 2. Locate the set screw on the underside of the sink. The set screw is usually located near the center of the stopper. 3. Loosen the set screw using a screwdriver. Be careful not to overtighten the set screw, as this could damage the stopper. 4. Gently pull the stopper straight up to remove it from the sink. If the stopper is stuck, you may need to use pliers to gently pry it loose. 5. Clean the stopper and the drain opening. Use a rag or towel to wipe away any dirt or debris from the stopper and the drain opening. 6. Reinstall the stopper. Insert the stopper into the drain opening and tighten the set screw to secure it in place. 7. Turn on the water supply to your sink and check for leaks. If there are any leaks, tighten the set screw further.

If you are unable to remove the stopper using the steps above, you may need to call a plumber for assistance.

Additional Tips

Here are a few additional tips for removing a Delta bathroom sink stopper:

If the stopper is made of plastic, be careful not to overtighten the set screw, as this could crack the stopper.
If the stopper is made of metal, you may need to use a penetrating oil to loosen the set screw.
If you are having difficulty removing the stopper, you can try using a suction cup to pull it out.

With a little care and effort, you should be able to remove your Delta bathroom sink stopper in no time.