How Do You Fix A Broken Bathroom Sink Stopper

The bathroom sink stopper is an important part of the sink as it prevents water from draining out of the sink. It is usually made of rubber or plastic and is attached to the drain hole with a screw or nut. Over time, the stopper can become worn or damaged, which can cause it to leak or become difficult to operate. If your bathroom sink stopper is broken, there are a few things you can do to fix it.

First, you need to determine what type of stopper you have. There are two main types of sink stoppers: pop-up stoppers and lift-and-turn stoppers. Pop-up stoppers are the most common type of stopper. They are usually made of rubber or plastic and have a small button on the top that you press to open and close the stopper. Lift-and-turn stoppers are less common. They are usually made of metal and have a handle that you lift and turn to open and close the stopper.

Once you know what type of stopper you have, you can begin to fix it. If you have a pop-up stopper, you will need to remove the button from the top of the stopper. You can do this by using a small screwdriver or a pair of pliers. Once the button is removed, you will need to unscrew the stopper from the drain hole. You can do this by using a pair of pliers or a wrench.

If you have a lift-and-turn stopper, you will need to remove the handle from the stopper. You can do this by using a small screwdriver or a pair of pliers. Once the handle is removed, you will need to unscrew the stopper from the drain hole. You can do this by using a pair of pliers or a wrench.

Once the stopper is removed from the drain hole, you will need to inspect it for damage. If the stopper is cracked or broken, you will need to replace it. You can purchase a new stopper at a hardware store or a home improvement store.

If the stopper is not cracked or broken, you may be able to repair it. You can try to repair the stopper by using a rubber sealant or a silicone sealant. Apply the sealant to the damaged area of the stopper and allow it to dry. Once the sealant is dry, the stopper should be repaired.

If you are unable to repair the stopper, you will need to replace it. You can purchase a new stopper at a hardware store or a home improvement store. When you purchase a new stopper, make sure that it is the correct size for your sink.

Once you have the new stopper, you can install it in the drain hole. If you have a pop-up stopper, you will need to screw the stopper into the drain hole. You can do this by using a pair of pliers or a wrench. If you have a lift-and-turn stopper, you will need to screw the stopper into the drain hole and then attach the handle to the stopper. You can do this by using a small screwdriver or a pair of pliers.