How To Fix A Leaking Bathroom Sink Stopper

How to Fix a Leaking Bathroom Sink Stopper

A leaking bathroom sink stopper can be a frustrating problem, but it's one that you can usually fix yourself with a few simple tools and materials. Here's a step-by-step guide on how to do it:

1. Gather your materials

You will need the following materials:

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Replacement stopper
Plumber's putty
Cloth or rag

2. Turn off the water supply

Before you begin, turn off the water supply to the sink. You can do this by turning off the valves under the sink or by turning off the main water supply to your home.

3. Remove the old stopper

Use the adjustable wrench to loosen the nut that holds the stopper in place. Once the nut is loose, you can remove the old stopper by hand. If the stopper is stuck, you can use a flat head screwdriver to pry it loose.

4. Clean the drain hole

Once the old stopper is removed, clean the drain hole thoroughly. Remove any debris or old plumber's putty. You can use a cloth or rag to clean the drain hole.

5. Apply plumber's putty to the new stopper

Roll a small amount of plumber's putty into a snake and apply it to the base of the new stopper. The plumber's putty will help to create a watertight seal between the stopper and the drain hole.

6. Insert the new stopper

Insert the new stopper into the drain hole and tighten the nut by hand. Use the adjustable wrench to tighten the nut further, but be careful not to overtighten it.

7. Turn on the water supply

Turn on the water supply to the sink and check for leaks. If there are no leaks, you have successfully fixed the leaking bathroom sink stopper.

Tips

If you are not comfortable fixing the leaking bathroom sink stopper yourself, you can call a plumber to do it for you.
If the leaking bathroom sink stopper is caused by a damaged drain, you will need to replace the drain. This is a more complex repair that should be done by a plumber.
To prevent future leaks, regularly clean the drain hole and apply plumber's putty to the stopper.