How To Fix A Stuck Bathroom Sink Stopper

A stuck bathroom sink stopper can be a frustrating and annoying problem. It can make it difficult to use the sink and can lead to water damage if not fixed promptly. Fortunately, there are a few simple steps you can take to fix a stuck bathroom sink stopper. In this article, we will provide you with a step-by-step guide on how to fix a stuck bathroom sink stopper.

Step 1: Remove the stopper

The first step is to remove the stopper. To do this, you will need to use a pair of pliers or a wrench. Grip the stopper with the pliers or wrench and turn it counterclockwise. The stopper should come loose and you will be able to remove it from the sink.

Step 2: Clean the stopper and the drain

Once you have removed the stopper, you will need to clean it and the drain. Use a damp cloth to wipe down the stopper and remove any dirt or debris. You can also use a toothbrush to clean the drain and remove any hair or soap scum that may be causing the stopper to stick.

Step 3: Apply some lubricant

Once the stopper and the drain are clean, you will need to apply some lubricant. You can use petroleum jelly, WD-40, or any other type of lubricant that is safe to use on metal. Apply the lubricant to the stopper and the drain and work it around so that it coats all of the surfaces.

Step 4: Reinstall the stopper

Once you have applied the lubricant, you can reinstall the stopper. To do this, simply insert the stopper into the drain and turn it clockwise until it is tight. Make sure that the stopper is not too tight, as this could damage the drain.

Step 5: Test the stopper

Once the stopper is reinstalled, you will need to test it to make sure that it is working properly. Run some water into the sink and then try to plug the drain with the stopper. The stopper should seal the drain and prevent any water from flowing out. If the stopper is still not working properly, you may need to repeat the above steps or call a plumber.