How To Measure For A Bathroom Vanity Top

How to Measure for a Bathroom Vanity Top

Replacing the vanity in a bathroom is one of the quickest ways to update the space. Swapping out the old vanity with a new one usually means buying a new vanity top as well, unless you're lucky enough to find a new vanity that includes the top. Measuring the space correctly before you shop for a vanity is important, because you want to make sure the new one will fit properly.

Measuring for a bathroom vanity top is not a difficult task, but it does require some careful attention to detail. Here are the steps to follow to measure for a bathroom vanity top:

Step 1: Determine the Type of Vanity Top You Want

There are two main types of vanity tops: integrated and drop-in. Integrated vanity tops are one solid piece that includes the sink, while drop-in vanity tops are installed on top of the vanity cabinet and have a sink that is separate from the countertop.

Once you have determined the type of vanity top you want, you can begin measuring for it.

Step 2: Measure the Width of the Vanity Cabinet

The first step is to measure the width of the vanity cabinet. This is the distance from one side of the cabinet to the other side. The vanity top should be the same width as the vanity cabinet.

To measure the width of the vanity cabinet, use a measuring tape and measure from one edge of the cabinet to the other edge. Be sure to measure at the front of the cabinet, as this is where the vanity top will be installed.

Step 3: Measure the Depth of the Vanity Cabinet

The next step is to measure the depth of the vanity cabinet. This is the distance from the front of the cabinet to the back of the cabinet. The vanity top should be the same depth as the vanity cabinet.

To measure the depth of the vanity cabinet, use a measuring tape and measure from the front of the cabinet to the back of the cabinet. Be sure to measure at the center of the cabinet, as this is where the vanity top will be installed.

Step 4: Measure the Height of the Vanity Cabinet

The next step is to measure the height of the vanity cabinet. This is the distance from the floor to the top of the cabinet. The vanity top should be the same height as the vanity cabinet.

To measure the height of the vanity cabinet, use a measuring tape and measure from the floor to the top of the cabinet. Be sure to measure at the center of the cabinet, as this is where the vanity top will be installed.

Step 5: Measure the Distance from the Wall to the Front of the Vanity Cabinet

The next step is to measure the distance from the wall to the front of the vanity cabinet. This is the distance that the vanity top will overhang the vanity cabinet. The overhang is typically between 1/2 inch and 1 inch.

To measure the distance from the wall to the front of the vanity cabinet, use a measuring tape and measure from the wall to the front of the cabinet. Be sure to measure at the center of the cabinet, as this is where the vanity top will be installed.

Step 6: Add Up the Measurements

Once you have all of the measurements, you can add them up to get the total size of the vanity top. The vanity top should be the same size as the total of the measurements.

For example, if the vanity cabinet is 36 inches wide, 24 inches deep, and 30 inches high, and the overhang is 1 inch, then the vanity top should be 36 inches wide, 24 inches deep, and 30 inches high.