How to Remove a Kohler Bathroom Sink Faucet Handle
If your Kohler bathroom sink faucet handle is dripping or loose, you may need to remove it to replace the cartridge or tighten the handle. Removing a Kohler faucet handle is a relatively simple task that can be completed in a few minutes with the right tools.
Tools You'll Need:
- Phillips head screwdriver
- Adjustable wrench
- Faucet handle puller tool (optional)
Step 1: Turn Off the Water Supply
Before you begin working on the faucet, turn off the water supply to the sink. There will be two shut-off valves underneath the sink, one for the hot water and one for the cold water. Turn both valves clockwise to close them.
Step 2: Remove the Escutcheon Plate
The escutcheon plate is the decorative cover that surrounds the base of the faucet handle. Use a Phillips head screwdriver to remove the screws that hold the escutcheon plate in place. Once the screws are removed, lift off the escutcheon plate.
Step 3: Remove the Handle Screw
Underneath the escutcheon plate, you will see a screw that holds the faucet handle in place. Use a Phillips head screwdriver to remove the screw. If the screw is tight, you can use an adjustable wrench to help you loosen it.
Step 4: Pull Off the Handle
Once the screw is removed, you can pull the faucet handle straight off the faucet stem. If the handle is stuck, you can use a faucet handle puller tool to help you remove it.
Step 5: Inspect the Cartridge
Once the handle is removed, you will see the cartridge. The cartridge is the part that controls the flow of water through the faucet. Inspect the cartridge for any signs of damage or wear. If the cartridge is damaged or worn, it will need to be replaced.
Step 6: Reinstall the Cartridge
If the cartridge needs to be replaced, follow the instructions included with the new cartridge to reinstall it.
Step 7: Reassemble the Faucet
Once the cartridge is installed, you can reassemble the faucet. Start by placing the faucet handle back on the faucet stem. Then, secure the handle with the screw. Finally, replace the escutcheon plate and secure it with the screws.
Step 8: Turn On the Water Supply
Once the faucet is reassembled, turn on the water supply to the sink. Check for any leaks. If there are no leaks, the repair is complete.
Kohler Faucet Replace Spline Insert
How To Remove Kohler Bathroom Faucet Handle Melted Stories
How To Fix A Hard Turn Bathroom Faucet Handle
Remove The Handles For Devonshire Bathroom Faucet
Kohler Wide Spread Taboret Lavatory Faucet Stems Replaced
Kohler Forte Single Hole Handle Low Arc Water Saving Bathroom Faucet In Polished Chrome K 10215 4 Cp The Home Depot
How To Remove A Single Stem Kohler Kitchen Faucets Infinity
How To Remove And Install A Bathroom Faucet
K R72781 4d1 Elliston Widespread Bathroom Sink Faucet 1 2 Gpm Kohler
Kohler Ashan Single Hole Handle Bathroom Faucet In Matte Black K R27136 4d Bl The Home Depot