How To Repair Bathroom Sink Chip Porcelain

Bathroom sink chips are a common problem that can be caused by a variety of factors, including accidentally dropping something on the sink, or wear and tear over time. While small chips may not seem like a big deal, they can actually be quite unsightly and can even lead to further damage if not repaired properly.

Fortunately, repairing a bathroom sink chip is a relatively easy and inexpensive process that can be done in a few simple steps.

Gather Your Supplies

Before you begin, you will need to gather the following supplies:

A porcelain repair kit
A clean cloth
A pair of tweezers
A small bowl of water
A toothpick
A nail file or sandpaper (optional)

Clean the Chip

The first step is to clean the chip thoroughly. This will help to remove any dirt or debris that could interfere with the repair process.

To clean the chip, simply wipe it down with a clean cloth dampened with water. Be sure to rinse the cloth thoroughly after each wipe to avoid spreading any dirt or debris.

Apply the Porcelain Repair Compound

Once the chip is clean, you can begin to apply the porcelain repair compound. The porcelain repair compound is a two-part epoxy that will bond to the porcelain and fill in the chip.

To apply the porcelain repair compound, follow the instructions on the package. In general, you will need to mix the two parts of the epoxy together and then apply it to the chip using a toothpick or other small tool.

Smooth the Compound

Once you have applied the porcelain repair compound, you will need to smooth it out so that it is level with the rest of the sink.

To do this, you can use a small bowl of water and a toothpick. Dip the toothpick in the water and then gently smooth out the porcelain repair compound until it is level with the rest of the sink.

Allow the Compound to Dry

Once you have smoothed out the porcelain repair compound, you will need to allow it to dry completely.

The drying time will vary depending on the type of porcelain repair compound that you are using. However, most porcelain repair compounds will dry within 24 hours.

Sand the Compound (Optional)

Once the porcelain repair compound has dried, you can sand it smooth if desired. This will help to make the repair less noticeable.

To sand the porcelain repair compound, use a nail file or sandpaper. Be sure to sand gently so that you do not damage the surrounding porcelain.

Clean the Sink

Once you have sanded the porcelain repair compound, you can clean the sink to remove any dust or debris.

To clean the sink, simply wipe it down with a clean cloth dampened with water. Be sure to rinse the cloth thoroughly after each wipe to avoid spreading any dust or debris.