How To Replace A Stopper In Bathroom Sink

A bathroom sink stopper is a small but important part of your bathroom. It helps to keep water in the sink when you need it and prevents it from draining out when you don't. If your sink stopper is broken or damaged, it can be a major inconvenience. Fortunately, replacing a sink stopper is a relatively easy task that can be done in just a few minutes.

Here are the steps on how to replace a stopper in bathroom sink:

1. Remove the old stopper.

The first step is to remove the old stopper. To do this, simply pull up on the stopper until it comes loose. If the stopper is stuck, you may need to use a pair of pliers to gently pry it out.

2. Clean the drain.

Once the old stopper is removed, it's important to clean the drain. This will help to remove any debris that may be blocking the drain and preventing the new stopper from fitting properly.

3. Insert the new stopper.

Once the drain is clean, you can insert the new stopper. To do this, simply push the stopper down into the drain until it fits snugly. Make sure that the stopper is facing the correct direction, so that it will open and close properly.

4. Test the stopper.

Once the stopper is inserted, test it to make sure that it is working properly. To do this, fill the sink with water and then close the stopper. The water should stay in the sink. If the water drains out, then the stopper is not fitted properly and you will need to adjust it.

5. Tighten the stopper.

If the stopper is fitted properly, then you need to tighten it. To do this, use a pair of pliers to tighten the nut that is located on the underside of the stopper. Be careful not to overtighten the nut, as this could damage the stopper.

6. Finish up.

Once the stopper is tightened, you can finish up by cleaning up the area and disposing of the old stopper. Your sink is now ready to use again.

Replacing a sink stopper is a simple task that can be done in just a few minutes. By following these steps, you can easily replace a broken or damaged stopper and get your sink working properly again.