Fitting A Bathroom Ceiling Extractor Fan With Light

A bathroom ceiling extractor fan with light is an essential appliance for any modern bathroom. It helps to remove moisture and odours from the air, preventing the build-up of mould and mildew. It can also provide additional lighting, making it easier to see when shaving or applying makeup.

Fitting a bathroom ceiling extractor fan with light is a relatively simple DIY task that can be completed in a few hours. However, it is important to follow the instructions carefully to ensure that the fan is installed safely and correctly.

Tools and materials you will need

* Bathroom ceiling extractor fan with light * Screwdriver * Drill * Spirit level * Measuring tape * Pencil * Wire strippers * Electrical tape * Safety glasses * Dust mask

Step-by-step instructions

1. Turn off the electricity supply to the bathroom at the fuse box or circuit breaker. 2. Remove the old extractor fan (if there is one). This is usually held in place by screws. 3. Mark the position of the new extractor fan on the ceiling. Use a spirit level to ensure that the fan will be level when it is installed. 4. Drill pilot holes for the screws that will hold the extractor fan in place. 5. Connect the wires from the extractor fan to the wires in the ceiling. Make sure that the live wires are connected to the live wires, the neutral wires are connected to the neutral wires, and the earth wires are connected to the earth wires. Use electrical tape to insulate the connections. 6. Screw the extractor fan into place. 7. Turn on the electricity supply to the bathroom and test the extractor fan.

Tips

* If you are not confident about fitting a bathroom ceiling extractor fan with light yourself, it is best to hire a qualified electrician. * Make sure that the extractor fan is powerful enough for the size of your bathroom. A good rule of thumb is to choose a fan that has a CFM (cubic feet per minute) rating of at least 50 CFM for every 50 square feet of floor space. * Install the extractor fan on an outside wall if possible. This will allow the fan to vent directly to the outside, which is more efficient than venting through the roof. * Clean the extractor fan regularly to prevent the build-up of dust and dirt.

Conclusion

Fitting a bathroom ceiling extractor fan with light is a simple DIY task that can improve the air quality and lighting in your bathroom. By following the instructions in this article, you can ensure that the fan is installed safely and correctly.