How Do I Change The Lightbulb In My Nutone Bathroom Fan

How Do I Change The Lightbulb In My Nutone Bathroom Fan?

Changing the lightbulb in your Nutone bathroom fan is a relatively simple task that can be completed in a few minutes. However, it is important to follow the correct steps to ensure that you do not damage the fan or the lightbulb. In this article, we will provide you with a step-by-step guide on how to change the lightbulb in your Nutone bathroom fan.

Before you begin, you will need to gather a few tools. These include a screwdriver, a new lightbulb, and a ladder. Once you have gathered your tools, you can follow the steps below to change the lightbulb in your Nutone bathroom fan:

Turn off the power to the fan.

This can be done at the circuit breaker or fuse box. 2.

Remove the fan cover.

The fan cover is typically held in place by screws. Use a screwdriver to remove the screws and then carefully lift the fan cover off. 3.

Disconnect the wires from the lightbulb.

The wires are typically connected to the lightbulb by wire nuts. Use a pair of pliers to twist the wire nuts off and then disconnect the wires from the lightbulb. 4.

Remove the lightbulb.

Once the wires are disconnected, you can simply unscrew the lightbulb from the socket. 5.

Install the new lightbulb.

Screw the new lightbulb into the socket. 6.

Reconnect the wires to the lightbulb.

Use a pair of pliers to twist the wire nuts back onto the wires. 7.

Replace the fan cover.

Carefully lift the fan cover back into place and then secure it with the screws. 8.

Turn on the power to the fan.

Once the fan cover is in place, you can turn the power back on at the circuit breaker or fuse box.

Changing the lightbulb in your Nutone bathroom fan is a simple task that can be completed in a few minutes. By following the steps above, you can ensure that you do not damage the fan or the lightbulb.