Madison 72 Solid White Double Sink Bathroom Vanity Set Up Instructions

The Madison 72 Solid White Double Sink Bathroom Vanity is a beautiful and functional piece of furniture that can transform your bathroom. This comprehensive guide will provide step-by-step instructions to help you assemble and install your new vanity, ensuring a smooth and successful process.

Unpacking and Inspection

Before starting the assembly process, carefully unpack the vanity set and inspect all components for any damages or missing parts. The package should include the vanity cabinet, two sinks, a countertop, hardware, and installation instructions.

Lay out all components in a clean and spacious area for easy access.
Examine the vanity cabinet for any scratches, dents, or imperfections.
Verify that all sink components, such as drain assemblies and pop-up drains, are present and undamaged.
Check the countertop for any cracks or chips, and make sure the hardware is complete and in good condition.
If any parts are damaged or missing, contact the manufacturer immediately for replacements.

Assembling the Vanity

The vanity cabinet itself may arrive pre-assembled, but the countertop and sink installation will require some assembly. Follow these steps:

Attaching Countertop:
The countertop may have pre-drilled holes for the sinks. Carefully align the countertop with the vanity cabinet, ensuring that the holes for the sinks are properly positioned. Use the included screws and hardware to secure the countertop to the vanity cabinet.
Installing Sinks:
Position each sink in its corresponding hole on the countertop. Apply a bead of silicone sealant around the perimeter of each sink hole to create a watertight seal. Carefully lower the sinks into place and press them firmly against the countertop.
Connecting Drain Assemblies:
Connect the drain assemblies to the sinks, ensuring that all parts are properly fitted and secured.
Installing Hardware:
Once the sinks and drain assemblies are installed, attach the hardware, such as cabinet doors, drawers, and knobs. Make sure all screws are securely tightened.

Installing the Vanity

Before installing the vanity, make sure the bathroom floor is level. If necessary, adjust the floor to ensure proper support and prevent the vanity from tilting.

Prepare the Location:
Choose a suitable location in your bathroom for the vanity, ensuring that it is close to plumbing pipes and electrical outlets.
Marking and Drilling:
Mark locations on the wall for the vanity’s mounting brackets. Use a level to ensure that the marks are horizontal. Drill pilot holes at the marked locations and install anchors if necessary.
Attaching the Brackets:
Secure the mounting brackets to the wall using the provided hardware.
Positioning the Vanity:
Carefully lift and position the vanity over the brackets, ensuring that it is aligned with the wall.
Securing the Vanity:
Attach the vanity to the brackets using the remaining hardware, ensuring that it is securely attached and stable.

Final Touches and Connections

Once the vanity is securely installed, connect the plumbing and electrical components.

Connecting Plumbing:
Connect the water supply lines to the faucets and the drain lines to the drain assemblies. Be sure to use plumber's tape on the threads to prevent leaks.
Connecting Electrical:
If your vanity has electrical components, such as a mirror with lights, connect the wiring to the appropriate outlets.
Testing:
After connecting everything, turn on the water supply and test the faucets, drains, and electrical components to ensure that everything is working properly.

Congratulations! You have successfully assembled and installed your Madison 72 Solid White Double Sink Bathroom Vanity. Enjoy your newly renovated bathroom!