How To Fix Dripping Bathroom Mixer Tap

By | July 3, 2022

How to Fix a Dripping Bathroom Mixer Tap

A dripping bathroom mixer tap can be a frustrating and annoying problem. Not only does it waste water, but it can also create noise that can be difficult to ignore. Fortunately, fixing a dripping mixer tap is usually a relatively simple task that can be completed in a few minutes.

Identifying the Source of the Leak

The first step in fixing a dripping mixer tap is to identify the source of the leak. There are two common causes of leaks in mixer taps: worn-out washers and faulty O-rings. Washers are small, rubber discs that create a seal between the tap body and the spout. O-rings are similar to washers, but they are located inside the tap body and create a seal between the different components of the tap.

To determine if the leak is coming from a worn-out washer, try tightening the packing nut on the base of the tap. If this stops the leak, then the washer is likely the culprit. If tightening the packing nut does not stop the leak, then the leak is probably coming from a faulty O-ring.

Replacing a Worn-Out Washer

Replacing a worn-out washer is a relatively simple task. Here are the steps involved:

  1. Turn off the water supply to the tap.
  2. Open the tap to release any remaining water.
  3. Unscrew the packing nut on the base of the tap.
  4. Remove the old washer and replace it with a new one.
  5. Reassemble the tap and tighten the packing nut.
  6. Turn on the water supply and check for leaks.

Replacing a Faulty O-Ring

Replacing a faulty O-ring is a bit more complex than replacing a washer, but it is still a task that can be completed in a few minutes. Here are the steps involved:

  1. Turn off the water supply to the tap.
  2. Open the tap to release any remaining water.
  3. Remove the handle of the tap.
  4. Unscrew the cartridge from the tap body.
  5. Remove the old O-ring and replace it with a new one.
  6. Reassemble the tap and tighten the cartridge.
  7. Reattach the handle.
  8. Turn on the water supply and check for leaks.

Preventing Future Leaks

There are a few things you can do to help prevent future leaks in your bathroom mixer tap:

  • Don't overtighten the packing nut.
  • Replace washers and O-rings regularly.
  • Avoid using harsh chemicals to clean the tap.
  • If you notice any leaks, fix them promptly.

By following these tips, you can help keep your bathroom mixer tap in good working order and prevent costly water damage.


How To Fix A Dripping Tap Admiral

How To Fix A Dripping Tap Admiral

How To Fix A Leaking Bathtub Faucet

How To Fix A Leaking Bathtub Faucet Diy Family Handyman

Bath Shower Mixer Ceramic Disc Flow

Bath Shower Mixer Ceramic Disc Flow Valve Maintenance And Replacement

Bath Shower Mixer Ceramic Disc Flow

Bath Shower Mixer Ceramic Disc Flow Valve Maintenance And Replacement

Dripping Single Lever Tub Mixer Faucet

How To Fix A Dripping Single Lever Tub Mixer Faucet Hudson Reed

Here S Why Your New Bathroom Tap Is

Here S Why Your New Bathroom Tap Is Leaking And How To Fix It Plumber Hills District

How To Fix A Bathroom Faucet 14 Steps

How To Fix A Bathroom Faucet 14 Steps

How To Fix A Dripping Bath Filler Tap 2

How To Fix A Dripping Bath Filler Tap 2 Handle Hudson Reed

How To Fix A Leaking Mixer Tap 6 Steps

How To Fix A Leaking Mixer Tap 6 Steps Guide Tunnel Vision

How To Fix A Dripping Tap

How To Fix A Dripping Tap

Leave a Reply

Your email address will not be published. Required fields are marked *