How To Remove A Bathroom Mirror That Has Clips

How to Remove a Bathroom Mirror That Has Clips

Removing a bathroom mirror that uses clips to hold it in place may seem like a simple task, but there are a few essential steps to follow to ensure it's done safely and without causing damage.

1. Gather the Necessary Tools

Before you get started, gather the necessary tools: a sharp knife or razor blade, a putty knife or scraper, a screwdriver, and possibly a suction cup or two.

2. Remove Visible Clips

Inspect the edges of the mirror for visible clips that are holding it in place. Using a sharp knife or razor blade, carefully pry up the edges of the clips and pop them off. Do this gently to avoid breaking the clips.

3. Loosen the Mirror

Slide the putty knife or scraper behind the bottom edge of the mirror. Gently pry it upwards to loosen the mirror from the clips that are not visible.

4. Remove Concealed Clips

If there are still clips holding the mirror in place, use a screwdriver to loosen them. Be careful not to overtighten or damage the clips or the wall.

5. Remove the Mirror

Once the clips are loosened, carefully lift the mirror away from the wall. If the mirror is heavy, use suction cups to help prevent it from falling and causing damage.

6. Clean the Wall and Clips

After removing the mirror, use a damp cloth to clean the wall and the clips of any adhesive residue or dirt. This will make it easier to reinstall the mirror or put up a new one.

Tips:

Wear safety glasses to protect your eyes from flying debris.
If the mirror is glued to the wall, you may need to use a heat gun or blow dryer to soften the adhesive before removing it.
Be patient and work slowly to avoid breaking the mirror or damaging the wall.