How To Remove A Pegasus Bathroom Faucet Handle Removal Tool

How To Remove a Pegasus Bathroom Faucet Handle

Pegasus bathroom faucets are known for their elegant design and reliable performance. However, there may come a time when you need to remove the faucet handle. This could be for various reasons, such as replacing a worn-out handle, repairing a leaking faucet, or simply cleaning the faucet. Removing a Pegasus bathroom faucet handle is a straightforward process that can be accomplished with the right tools and a little bit of patience.

Step 1: Gather the Necessary Tools

Before you begin, ensure you have the following tools:

A Phillips-head screwdriver
A flat-head screwdriver
A pair of pliers (optional)
A towel or rag

Step 2: Locate the Set Screw

Turn off the water supply to the faucet. Locate the set screw, which is typically found on the handle's underside or side. This screw holds the handle in place. In some Pegasus faucets, the set screw might be concealed by a decorative cap. Use a flat-head screwdriver to pry off the cap if necessary.

Step 3: Loosen the Set Screw

Using a Phillips-head screwdriver, carefully loosen the set screw by turning it counterclockwise. If the screw is stubborn, you can use a pair of pliers to get a better grip. Be careful not to strip the screw head.

Step 4: Remove the Handle

Once the set screw is loosened, gently pull the handle straight out from the faucet stem. If the handle is stuck, you can gently tap on the back of the handle with a flat-head screwdriver to help loosen it. Take care not to apply excessive force which could damage the faucet.

Step 5: Remove the Cartridge (Optional)

Once the handle is removed, you may need to remove the cartridge, which is the part that controls the water flow. This may be necessary if you are replacing the cartridge or cleaning it. To remove the cartridge, locate the retaining nut or clip that secures it to the faucet stem. Use a wrench or pliers to remove this nut or clip, and then lift the cartridge out of the stem.

Step 6: Replace the Handle (Optional)

If you are replacing the handle, simply follow the steps in reverse order. Place the new handle onto the faucet stem, making sure it is aligned correctly. Tighten the set screw securely to ensure the handle is firmly attached. Turn the water supply back on to the faucet and check for any leaks. If you notice any leakage, tighten the set screw further.

Additional Tips

Here are some additional tips for removing a Pegasus bathroom faucet handle:

Always turn off the water supply to the faucet before beginning work.
Use a towel or rag to protect the faucet finish from scratches.
If you are having trouble loosening the set screw, try using a lubricant like WD-40.
Be gentle while removing the handle to avoid damaging the faucet.
If you are unsure about how to remove a particular Pegasus bathroom faucet handle, it is best to consult a professional plumber.

With these steps, you should be able to remove a Pegasus bathroom faucet handle safely and efficiently. Remember to always exercise caution and use the appropriate tools.