How To Remove Bathroom Sink Stopper Moen

How to Remove a Moen Bathroom Sink Stopper

Removing a Moen bathroom sink stopper is a relatively simple task that can be completed in a few minutes. By following the steps below, you can easily remove the stopper and clean it or replace it with a new one. ### Materials You'll Need * Adjustable wrench or pliers * Screwdriver (optional) * Replacement stopper (optional) ### Step-by-Step Instructions

1. Turn off the water supply.

Before you begin, it's important to turn off the water supply to the sink. This will prevent water from spraying everywhere when you remove the stopper.

2. Remove the drain cover.

The drain cover is the round or square piece that covers the drain hole in the sink. It is usually held in place by a few screws. Use a screwdriver to remove the screws and then lift the cover off.

3. Loosen the stopper.

The stopper is held in place by a nut that is located underneath the sink. Use an adjustable wrench or pliers to loosen the nut. Do not remove the nut completely.

4. Lift the stopper out.

Once the nut is loose, you can lift the stopper out of the drain hole. If the stopper is stuck, you can use a screwdriver to gently pry it loose.

5. Clean or replace the stopper.

If you are simply cleaning the stopper, you can wash it with soap and water. If you are replacing the stopper, insert the new stopper into the drain hole and tighten the nut.

6. Reinstall the drain cover.

Once the stopper is in place, you can reinstall the drain cover. Tighten the screws to secure it in place.

7. Turn on the water supply.

Once the drain cover is in place, you can turn on the water supply and check for leaks. If there are any leaks, you may need to tighten the nut further. ### Tips * If you have a pop-up stopper, you may need to use a special tool to remove it. * If you are having trouble removing the stopper, you can call a plumber for assistance. * It is a good idea to clean your bathroom sink stopper regularly to prevent clogs and buildup.