How To Remove Soft Close Bathroom Vanity Drawers

Removing soft close bathroom vanity drawers can be a daunting task, but it is essential to do so if you need to access the plumbing or make repairs. There are a few different ways to remove soft close drawers, depending on the type of drawer you have. In this article, we will provide instructions on how to remove the most common type of soft close drawer with a side-mounted release lever.

Before you begin, it is important to gather the following tools:

A Phillips head screwdriver
A flat head screwdriver
A pair of pliers

Once you have gathered your tools, you can begin the process of removing the soft close drawer.

Step 1: Locate the release lever

The release lever for soft close drawers is typically located on the side of the drawer, near the top. It is a small, plastic lever that is usually black or white. To release the drawer, simply pull the lever towards you.

Step 2: Pull the drawer out

Once you have released the lever, you can pull the drawer out of the cabinet. Be careful not to pull the drawer out too quickly, as this could damage the drawer or the cabinet.

Step 3: Disconnect the soft close mechanism

Once the drawer is out of the cabinet, you can disconnect the soft close mechanism. The soft close mechanism is typically attached to the back of the drawer with screws. To disconnect the mechanism, simply remove the screws and pull the mechanism away from the drawer.

Step 4: Reinstall the drawer

Once you have disconnected the soft close mechanism, you can reinstall the drawer. To do this, simply slide the drawer back into the cabinet and push it in until it is fully seated.

Removing soft close bathroom vanity drawers is a simple process that can be completed in just a few minutes. By following the instructions in this article, you can safely remove your drawers without damaging them or the cabinet.