How To Repair A Leaky Kohler Bathroom Sink Faucet

How to Repair a Leaky Kohler Bathroom Sink Faucet

Kohler bathroom sink faucets are known for their durability and style, but even the best faucets can develop leaks over time. If you're experiencing a leak from your Kohler faucet, don't panic. With a few simple tools and a little bit of know-how, you can repair the leak yourself. ### Tools and Materials * Adjustable wrench * Phillips screwdriver * Flathead screwdriver * Allen wrench (if necessary) * Replacement cartridge (if necessary) * Plumber's putty (optional) ### Safety First Before you begin any repairs, be sure to turn off the water supply to the faucet. You can do this by locating the shut-off valves beneath the sink and turning them clockwise. Once the water supply is turned off, open the faucet to release any residual water. ### Disassembling the Faucet 1.

Remove the handle.

Use the Phillips screwdriver to remove the screws that secure the handle to the faucet. Once the screws are removed, pull the handle straight up to remove it. 2.

Remove the cartridge.

Use the Allen wrench to loosen the cartridge retainer nut. Once the nut is loose, you can pull the cartridge straight out of the faucet body. 3.

Inspect the cartridge.

Once the cartridge is removed, inspect it for any signs of damage. If the cartridge is damaged, it will need to be replaced. 4.

Install the new cartridge.

If the cartridge is damaged, replace it with a new one. Be sure to insert the new cartridge into the faucet body correctly. 5.

Tighten the cartridge retainer nut.

Use the Allen wrench to tighten the cartridge retainer nut. 6.

Reassemble the faucet.

Reinstall the cartridge handle by pushing it down onto the faucet body. Then, tighten the screws that secure the handle to the faucet. 7.

Turn on the water supply.

Turn the water supply valves beneath the sink counterclockwise to turn the water back on. 8.

Check for leaks.

Once the water is turned back on, check for any leaks. If there are no leaks, the repair is complete. ### Troubleshooting If you are still experiencing a leak after following the steps above, there may be another issue with the faucet. Here are a few troubleshooting tips: *

Check the O-rings.

The O-rings are small rubber gaskets that create a seal between the cartridge and the faucet body. If the O-rings are worn or damaged, they can cause a leak. Replace the O-rings with new ones to fix the leak. *

Tighten the packing nut.

The packing nut is a nut that is located at the base of the faucet handle. If the packing nut is loose, it can cause a leak. Tighten the packing nut with an adjustable wrench to fix the leak. *

Replace the faucet.

If you have tried all of the above troubleshooting tips and you are still experiencing a leak, the faucet may need to be replaced. Contact a qualified plumber to replace the faucet for you.