Install A Delta Bathroom Faucet

How to Install a Delta Bathroom Faucet

Installing a Delta bathroom faucet is a relatively simple task that can be completed in a few hours. However, it is important to follow the instructions carefully to ensure that the faucet is installed properly and will not leak. ### Tools and Materials You will need the following tools and materials to install a Delta bathroom faucet: *

Delta bathroom faucet

Wrench

Adjustable pliers

Screwdriver

Plumber's putty

Teflon tape

Rag

### Step-by-Step Instructions 1.

Turn off the water supply.

The first step is to turn off the water supply to the bathroom. This can be done by closing the shut-off valves under the sink. 2.

Remove the old faucet.

Use a wrench to loosen the nuts that hold the old faucet in place. Once the nuts are loose, you can remove the faucet from the sink. 3.

Clean the sink.

Once the old faucet is removed, clean the sink thoroughly with a rag. This will remove any dirt or debris that could prevent the new faucet from sealing properly. 4.

Apply plumber's putty.

Apply a bead of plumber's putty around the base of the new faucet. This will help to create a watertight seal. 5.

Install the new faucet.

Insert the new faucet into the sink and tighten the nuts until they are snug. Do not overtighten the nuts, as this could damage the faucet. 6.

Connect the water supply lines.

Connect the water supply lines to the new faucet. Use Teflon tape to seal the connections. 7.

Turn on the water supply.

Turn on the water supply to the bathroom and check for leaks. If there are any leaks, tighten the nuts until the leak stops. ### Conclusion Installing a Delta bathroom faucet is a simple task that can be completed in a few hours. By following the instructions in this article, you can ensure that the faucet is installed properly and will not leak.