How To Put Bathroom Sink Drain Back In

How to Put Bathroom Sink Drain Back In

If your bathroom sink drain has come loose, don't worry - it's a relatively easy fix that you can do yourself. Here's a step-by-step guide on how to put a bathroom sink drain back in:

Step 1: Gather your tools

You will need the following tools:

Adjustable wrench
Pliers
Bucket
Cloth or sponge

Step 2: Turn off the water supply

Locate the water supply valves under the sink and turn them off. This will prevent water from flowing out of the drain while you are working.

Step 3: Remove the old drain

Use the adjustable wrench to loosen the nuts that hold the drain in place. Once the nuts are loose, you can pull the drain out of the sink.

Step 4: Clean the drain hole

Use a cloth or sponge to clean the drain hole. Remove any debris or gunk that may have accumulated.

Step 5: Install the new drain

Insert the new drain into the drain hole. Tighten the nuts by hand until they are snug. Then, use the adjustable wrench to tighten the nuts further.

Step 6: Turn on the water supply

Turn on the water supply valves under the sink and check for leaks. If there are no leaks, the drain is properly installed.

Tips:

If the nuts are difficult to loosen, you can use pliers to help you.
Be careful not to overtighten the nuts, as this can damage the drain.
If you are not comfortable working with plumbing, you can call a plumber to help you.

Putting a bathroom sink drain back in is a fairly simple task that can be completed in a few minutes. By following these steps, you can easily fix a loose drain and get your sink back up and running.