How To Take Apart Moen Bathroom Sink Faucet

How to Take Apart a Moen Bathroom Sink Faucet

Moen bathroom sink faucets are known for their durability and ease of use. However, there may come a time when you need to take apart the faucet to repair it or replace a part. Here is a step-by-step guide on how to take apart a Moen bathroom sink faucet:

Tools You'll Need:

* Adjustable wrench or Allen wrench * Flat-head screwdriver * Phillips-head screwdriver * Rag or towel

Step 1: Turn Off the Water Supply

Before you begin, turn off the water supply to the faucet. There are usually two shut-off valves under the sink, one for the hot water and one for the cold water. Turn the valves clockwise to close them.

Step 2: Remove the Aerator

The aerator is a small device attached to the end of the faucet spout. It helps to create a more forceful stream of water. To remove the aerator, use an adjustable wrench or Allen wrench to unscrew it from the faucet spout.

Step 3: Remove the Handle

The handle is attached to the faucet by a set screw. Use a flat-head screwdriver to loosen the set screw and then pull the handle off the faucet.

Step 4: Remove the Cartridge

The cartridge is the heart of the faucet. It contains all of the working parts that control the flow of water. To remove the cartridge, use an adjustable wrench or Allen wrench to unscrew the retaining nut that holds it in place. Once the retaining nut is loose, you can pull the cartridge out of the faucet.

Step 5: Disassemble the Cartridge

The cartridge is held together by a series of small screws. Use a Phillips-head screwdriver to remove the screws and disassemble the cartridge.

Step 6: Clean and Inspect the Parts

Once the cartridge is disassembled, clean all of the parts with a rag or towel. Inspect the parts for any signs of wear or damage. If any parts are damaged, they will need to be replaced.

Step 7: Reassemble the Cartridge

Once the parts are clean and inspected, reassemble the cartridge in the reverse order of disassembly. Make sure to tighten all of the screws securely.

Step 8: Reinstall the Cartridge

Insert the cartridge back into the faucet and tighten the retaining nut. Make sure that the cartridge is seated properly in the faucet.

Step 9: Reinstall the Handle

Slide the handle onto the faucet and tighten the set screw. Make sure that the handle is on securely.

Step 10: Reinstall the Aerator

Screw the aerator back onto the faucet spout. Make sure that the aerator is tightened securely.

Step 11: Turn on the Water Supply

Turn on the water supply to the faucet and check for any leaks. If there are any leaks, tighten the appropriate parts until the leaks stop.

Conclusion

Taking apart a Moen bathroom sink faucet is a relatively simple process that can be completed in about 30 minutes. By following these steps, you can easily repair or replace any parts of the faucet that may be malfunctioning.