Installing New Drain In Bathroom Sink

Installing a new drain in your bathroom sink is a straightforward plumbing project that most homeowners can complete in an afternoon. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber and ensure that your new drain is installed correctly.

Essential Aspects of Installing a New Drain in Bathroom Sink:

1. Choosing the Right Drain

First, you need to remove the old drain. To do this, you will need to unscrew the drain stopper from the sink. Once the stopper is removed, you can unscrew the drainpipe from the sink. The drainpipe should be attached to the sink by a nut. Once the nut is loosened, you can pull the drainpipe out of the sink.

2. Preparing the Sink

Once the old drain is removed, you need to prepare the sink for the new drain. To do this, you will need to clean the sink and apply a bead of caulk around the drain hole. The caulk will help to seal the drain and prevent leaks.

3. Installing the New Drain

Once the sink is prepared, you can install the new drain. To do this, you will need to insert the drain into the drain hole and tighten the nut. Once the nut is tightened, you can connect the drainpipe to the drain. The drainpipe should be attached to the drain by a nut. Once the nut is tightened, you can turn on the water and check for leaks.