Bathroom Sink Ball Rod Extension

The Comprehensive Guide to Bathroom Sink Ball Rod Extension

Bathroom sink ball rods play a crucial role in ensuring seamless operation of your sink's pop-up drain. However, there may come times when you need to extend its length for various reasons, such as replacing the drain assembly or accommodating a thicker sink countertop.

Extending the ball rod involves a few simple steps that can be easily performed with the right tools and knowledge. Here's a comprehensive guide to help you achieve a successful ball rod extension:

Materials Required:

New ball rod extension
Phillips screwdriver
Adjustable wrench
Pliers

Step-by-Step Instructions:

1. Disconnect the Drain Assembly:

Start by turning off the water supply beneath the sink. Place a bucket or towel below the drain to catch any water. Using the adjustable wrench, loosen the slip nuts that connect the drain assembly to the sink. Gently pull the drain assembly down to disconnect it.

2. Remove the Ball Rod:

Locate the ball rod, which is a thin, threaded rod connected to the underside of the pop-up stopper. Using the pliers, grasp the ball rod and unscrew it counterclockwise from the drain assembly. Keep a towel nearby to prevent water from spilling.

3. Measure and Cut the New Extension:

Take the new ball rod extension and measure the length you need to add. Mark the measured length on the extension and cut it using a hacksaw or pipe cutter.

4. Connect the Extension to the Ball Rod:

Thread the cut extension onto the existing ball rod, ensuring that it is tightly secured. Check the length to ensure it is sufficient for your needs.

5. Reattach the Ball Rod to the Drain Assembly:

Screw the ball rod back into the drain assembly clockwise. Tighten it securely using the pliers.

6. Reinstall the Drain Assembly:

Lift the drain assembly back into place and tighten the slip nuts using the adjustable wrench. Ensure they are snug but avoid overtightening.

7. Test the Drain:

Turn on the water supply and test the drain. Press the pop-up stopper to ensure it opens and closes smoothly.

Additional Tips:

If you are not comfortable performing the extension yourself, it is recommended to seek the assistance of a qualified plumber.
When measuring the length of the extension, consider the thickness of the sink countertop and the desired height of the pop-up stopper.
Use Teflon tape or plumber's putty on the threads of the ball rod and extension to ensure a watertight seal.

By following these steps, you can successfully extend your bathroom sink ball rod, ensuring smooth operation and a comfortable user experience.

Danco Universal Bathroom Pull Ball Rod Assembly In The Sink Drain Repair Parts Department At Com

Pop Up Lift Turn Pull Out Stopper Bathroom Sink Drains

Pf Waterworks Universal Pop Up Drain Repair Kit With Chrome And Gray Nuts Threaded Adjustable Center Pivot Ball Rod Assembly In The Sink Parts Department At Com