How Do You Change A Bathroom Sink Faucet

How to Change a Bathroom Sink Faucet

Replacing a bathroom sink faucet is a straightforward task that can be completed in a few hours with the right tools and materials. Here's a step-by-step guide to help you get the job done:

Materials You'll Need:

New bathroom sink faucet
Wrench
Pliers
Putty knife
Plumber's putty
Teflon tape

Step 1: Turn Off the Water Supply

Before you start working on the faucet, shut off the water supply to the sink. There should be two valves, one for hot water and one for cold water, located under the sink. Turn both valves clockwise until they are completely shut.

Step 2: Disconnect the Water Lines

Once the water supply is turned off, disconnect the water lines from the old faucet. Use a wrench to loosen the nuts that connect the lines to the faucet. Hold a bucket underneath to catch any water that may leak out.

Step 3: Remove the Old Faucet

Once the water lines are disconnected, you can remove the old faucet. Use a putty knife to loosen the plumber's putty around the base of the faucet. Then, use pliers to gently wiggle the faucet back and forth until it comes free.

Step 4: Prepare the New Faucet

Before installing the new faucet, apply a bead of plumber's putty around the base of the faucet. Then, wrap Teflon tape around the threads of the water lines. This will help to create a watertight seal.

Step 5: Install the New Faucet

Position the new faucet over the sink hole and insert the water lines through the holes in the base. Hand-tighten the nuts that connect the lines to the faucet. Then, use a wrench to tighten the nuts further, but do not overtighten.

Step 6: Connect the Water Lines

Next, connect the water lines to the valves under the sink. Use a wrench to tighten the nuts that connect the lines to the valves. Again, do not overtighten.

Step 7: Turn on the Water Supply

Once the faucet is installed and the water lines are connected, turn on the water supply. Check for any leaks around the base of the faucet and the connections to the valves. If you find any leaks, tighten the nuts or apply more plumber's putty as needed.

Conclusion

Congratulations! You have now successfully changed the bathroom sink faucet. With a little planning and effort, this is a task that most homeowners can complete on their own.