How Do You Replace A Bathroom Sink Faucet

How Do You Replace A Bathroom Sink Faucet?

Replacing a bathroom sink faucet is a relatively easy plumbing repair that can be completed in about an hour. By following these steps, you can save yourself the cost of hiring a plumber.

What You'll Need:

* New bathroom sink faucet * Adjustable wrench * Basin wrench * Plumber's putty * Teflon tape

Step-by-Step Instructions:

1. Turn off the water supply. There are usually two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water supply. 2. Disconnect the water supply lines. Use an adjustable wrench to loosen the nuts that connect the water supply lines to the faucet. Be careful not to overtighten the nuts, as this could damage the lines. 3. Remove the old faucet. Use a basin wrench to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can lift the faucet off the sink. 4. Apply plumber's putty. Roll out a small amount of plumber's putty into a rope and place it around the base of the new faucet. This will help to create a watertight seal. 5. Install the new faucet. Place the new faucet on the sink and tighten the nuts that hold it in place. Be sure to tighten the nuts evenly to avoid damaging the faucet. 6. Connect the water supply lines. Screw the water supply lines onto the faucet and tighten the nuts with an adjustable wrench. Be sure to wrap the threads of the nuts with Teflon tape to prevent leaks. 7. Turn on the water supply. Open the shut-off valves under the sink to turn on the water supply. Check for leaks around the faucet and water supply lines. If you find any leaks, tighten the nuts until the leak stops.

Tips:

* If you are not comfortable replacing the faucet yourself, you can hire a plumber to do it for you. * Be sure to purchase a faucet that is compatible with your sink. * If you have any questions about replacing a bathroom sink faucet, consult a plumbing professional.