How To Change A Bathroom Basin Tap Washer

How to Change a Bathroom Basin Tap Washer

A dripping tap is not only annoying, but it can also waste a lot of water. If you're experiencing a leaky bathroom basin tap, it's likely that the washer needs to be replaced. Replacing a tap washer is a relatively simple and inexpensive task that can be completed in a matter of minutes.

In this article, we will provide you with step-by-step instructions on how to change a bathroom basin tap washer. We will also provide some tips on how to prevent your taps from leaking in the future.

Tools and materials you will need:

New tap washer
Adjustable wrench
Spanner
Flat-head screwdriver
Bucket
Cloth

Step-by-step instructions:

1. Turn off the water supply. There will be two isolation valves under the basin, one for hot water and one for cold water. Turn both valves clockwise to turn off the water supply.

2. Open the tap. This will release any remaining water in the tap.

3. Loosen the packing nut. The packing nut is located at the base of the tap handle. Use an adjustable wrench to loosen the packing nut.

4. Remove the tap handle. Once the packing nut is loose, you should be able to pull the tap handle off the tap.

5. Remove the old washer. The old washer is located inside the tap body. Use a flat-head screwdriver to pry the old washer out.

6. Insert the new washer. Place the new washer into the tap body. Make sure that the washer is seated properly.

7. Replace the tap handle. Replace the tap handle onto the tap. Tighten the packing nut using an adjustable wrench.

8. Turn on the water supply. Turn both isolation valves counterclockwise to turn on the water supply.

9. Check for leaks. Once the water supply is turned on, check for any leaks. If there are any leaks, tighten the packing nut further.

Tips to prevent your taps from leaking in the future:

Don't overtighten the packing nut. Overtightening the packing nut can damage the tap.
Use a new washer every time you replace a tap washer.
Make sure that the washer is seated properly.
If you're not comfortable replacing a tap washer yourself, you can call a plumber.

By following these tips, you can keep your bathroom basin taps from leaking and save yourself money on your water bill.