How To Change A Bathroom Medicine Cabinet

If your bathroom medicine cabinet is looking worse for wear or simply doesn't suit your taste anymore, replacing it is a relatively straightforward project that can be completed in a few hours. Here's a step-by-step guide to help you get the job done.

### Materials

Before you start, gather the following materials:

New medicine cabinet
Screwdriver
Drill (optional)
Level
Stud finder (optional)
Caulk gun
Caulk

### Step 1: Remove the Old Medicine Cabinet

Turn off the water supply to the bathroom. Open the medicine cabinet doors and remove the shelves. Using a screwdriver, remove the screws that are holding the cabinet to the wall. Carefully pull the cabinet away from the wall, making sure not to damage the wall or the cabinet.

### Step 2: Prepare the Wall for the New Cabinet

If your new medicine cabinet is a different size than the old one, you may need to patch the wall before installing it. Use a piece of scrap wood or drywall to cover the hole left by the old cabinet. Secure the patch with screws or nails.

### Step 3: Install the New Medicine Cabinet

Place the new medicine cabinet on the wall and make sure it is level. Mark the locations of the mounting holes with a pencil. Using a drill, create pilot holes for the screws. Insert the screws into the pilot holes and tighten them until the cabinet is securely attached to the wall.

### Step 4: Caulk the Cabinet

Apply a bead of caulk around the edges of the cabinet where it meets the wall. This will help to seal the cabinet and prevent moisture from getting inside. Smooth out the caulk with your finger or a caulk tool.

### Step 5: Install the Shelves and Doors

Insert the shelves into the cabinet and secure them with screws or clips. Attach the doors to the cabinet and adjust them so that they open and close smoothly.

### Step 6: Turn on the Water Supply

Turn the water supply back on and check for leaks. If there are any leaks, tighten the screws or caulk the cabinet until the leaks stop.

### Tips

Here are a few tips to help you change your bathroom medicine cabinet:

If you are not sure how to turn off the water supply to your bathroom, consult a plumber.
Be careful not to overtighten the screws when installing the cabinet.
Use a level to make sure the cabinet is installed correctly.
Caulk around the edges of the cabinet to prevent moisture from getting inside.
If you are installing a new medicine cabinet with electrical outlets, be sure to hire an electrician to do the wiring.

By following these steps, you can replace your bathroom medicine cabinet in a few hours and give your bathroom a fresh new look.