How To Change A Bathroom Sink Faucet

How to Change a Bathroom Sink Faucet: A Comprehensive Guide

Updating your bathroom sink faucet can instantly revitalize the entire space with a fresh, modern look. Whether you're replacing a leaky faucet or simply upgrading for aesthetic reasons, changing a sink faucet is a relatively straightforward task that can be completed in a few hours with the right tools and instructions.

Before embarking on this project, ensure you have gathered the necessary materials, including a new faucet, basin wrench, adjustable wrench, plumber's putty, and a bucket or bowl for catching excess water.

Step 1: Shut Off Water Supply and Taps

Begin by turning off the water supply valves beneath your bathroom sink. These valves are typically located near the base of the sink and may require an adjustable wrench to close them securely.

Once the water supply is shut off, open both the hot and cold water taps in your sink to drain any remaining water from the faucet and pipes.

Step 2: Disconnect Old Faucet

Using a basin wrench, carefully loosen the nuts that connect the faucet to the supply lines. These nuts are located beneath the sink and may require some force to remove.

Once the nuts are loosened, disconnect the supply lines by hand or with an adjustable wrench. Place a bucket beneath the loosened connections to catch any water that remains in the lines.

Step 3: Remove Old Faucet

With the supply lines disconnected, gently lift the old faucet straight up to remove it from the sink.

Inspect the old faucet for any remaining plumber's putty that may be stuck on the underside. If present, scrape it away with a utility knife or putty knife.

Step 4: Prepare New Faucet

Apply a thin layer of plumber's putty around the base of your new faucet, where it will connect to the sink.

Thread the new faucet's supply lines through the corresponding holes in the sink, ensuring the washers are in place.

Step 5: Install New Faucet

Carefully align the new faucet with the holes in the sink and gently lower it into place.

From beneath the sink, secure the faucet by tightening the nuts that connect it to the supply lines.

Step 6: Reconnect Supply Lines

Hand-tighten the supply lines to the corresponding water valves beneath the sink.

Using an adjustable wrench, gently tighten the connections further, but avoid overtightening.

Step 7: Open Water Supply and Check for Leaks

Turn on the water supply valves beneath the sink.

Open both the hot and cold taps in your sink to allow the faucet to fill with water.

Thoroughly inspect all connections for any signs of leaks. If you notice any leaking, tighten the connections accordingly.

Step 8: Clean Up and Enjoy!

Once you're satisfied that the new faucet is secure and leak-free, clean up any excess water or plumber's putty.

Congratulations! You have successfully installed your new bathroom sink faucet, adding a touch of style and functionality to your bathroom.

Diy How To Replace A Bathroom Sink Faucet Remove Install

How To Replace A Bathroom Faucet Home Repair Tutor

How To Remove And Install A Bathroom Faucet

How To Replace A Bathroom Faucet Tinged Blue

How Do I Replace Bathroom Sink Faucet Handles Cleaning More