How To Change Bathroom Hardware

How to Change Bathroom Hardware: A Step-by-Step Guide

Updating bathroom hardware is an easy way to give your bathroom a fresh look and feel. Whether you're replacing old, worn-out hardware or simply want to change the style, it's a project that can be completed in a few hours. Here's a step-by-step guide to help you change bathroom hardware:

1. Gather Your Tools and Materials

Before you start, you'll need to gather a few tools and materials. These include:

New bathroom hardware (towel bars, towel rings, robe hooks, etc.)
Screwdriver or drill
Level
Pencil
Putty knife
Caulk gun and caulk

2. Remove the Old Hardware

Use a screwdriver or drill to remove the screws that are holding the old hardware in place. Once the screws are removed, you should be able to pull the old hardware off the wall. If the old hardware is caulked in place, you may need to use a putty knife to cut through the caulk.

3. Clean the Surface

Once the old hardware is removed, clean the surface where the new hardware will be installed. Use a damp cloth to wipe away any dirt or debris. Allow the surface to dry completely before proceeding.

4. Mark the Screw Holes

Use a level to mark the location of the screw holes for the new hardware. Hold the new hardware in place and use a pencil to mark the location of the screw holes. Once the screw holes are marked, remove the new hardware.

5. Pre-Drill the Screw Holes (if necessary)

If you are installing the new hardware into tile or another hard surface, you may need to pre-drill the screw holes. Use a drill bit that is slightly smaller than the diameter of the screws. Drill the holes to a depth of about 1/2 inch.

6. Install the New Hardware

Apply a small amount of caulk around the base of the new hardware. Place the new hardware over the screw holes and insert the screws. Tighten the screws until the hardware is secure. Wipe away any excess caulk.

7. Finish Up

Once the new hardware is installed, step back and admire your work! Your bathroom will now have a fresh, updated look.

Tips for Changing Bathroom Hardware

If you are not sure how to remove the old hardware, consult the manufacturer's instructions.
Be careful not to overtighten the screws when installing the new hardware.
Use a level to ensure that the new hardware is installed straight.
Apply a small amount of caulk around the base of the new hardware to prevent water from getting behind it.
If you are changing the style of the hardware, you may also need to change the towel bars, toilet paper holder, and other bathroom accessories.

Conclusion

Changing bathroom hardware is a quick and easy way to update the look of your bathroom. By following these steps, you can easily change the hardware in your bathroom and give it a fresh, new look.