How To Change Bathroom Pull Cord Switch

Changing a bathroom pull cord switch is a relatively simple task that can be completed in a few minutes. However, it is important to follow the correct steps to ensure that the switch is installed properly and safely.

The first step is to turn off the power to the bathroom at the circuit breaker panel. This will prevent you from getting shocked while you are working on the switch.

Once the power is off, you can remove the old switch by unscrewing the faceplate and then pulling the switch out of the electrical box. Be careful not to touch any of the wires that are connected to the switch.

Next, you need to connect the wires from the old switch to the new switch. The black wire should be connected to the brass screw on the new switch, the white wire should be connected to the silver screw, and the green or bare copper wire should be connected to the green screw.

Once the wires are connected, you can push the new switch into the electrical box and screw on the faceplate. Be sure to tighten the screws securely.

Finally, turn the power back on at the circuit breaker panel and test the new switch to make sure that it is working properly.

Changing a bathroom pull cord switch is a simple task that can be completed in a few minutes. However, it is important to follow the correct steps to ensure that the switch is installed properly and safely.