How To Change Broan Bathroom Fan Motor

Broan bathroom fans are a common fixture in many homes, and they can last for many years with proper maintenance. However, even the best fans will eventually need to be replaced, and one of the most common reasons for failure is a faulty motor.

If your Broan bathroom fan is no longer working, the first step is to check the motor. You can do this by removing the fan grille and looking for any signs of damage or wear. If the motor looks damaged, it will need to be replaced.

Replacing a Broan bathroom fan motor is not a difficult task, but it does require some basic electrical knowledge. If you are not comfortable working with electricity, it is best to call a qualified electrician.

Here are the steps on how to change a Broan bathroom fan motor:

Turn off the power to the fan.

This can be done by flipping the circuit breaker or removing the fuse that powers the fan. 2.

Remove the fan grille.

The grille is usually held in place by a few screws. Once the screws are removed, the grille can be pulled off. 3.

Disconnect the wires from the motor.

There will be two or three wires connected to the motor. Use a screwdriver to loosen the screws that hold the wires in place, and then pull the wires off of the motor terminals. 4.

Remove the motor from the fan housing.

The motor is usually held in place by a few screws. Once the screws are removed, the motor can be pulled out of the fan housing. 5.

Install the new motor.

The new motor should come with instructions on how to install it. Follow the instructions carefully, and make sure that the wires are connected to the correct terminals. 6.