How To Change Delta Bathroom Faucet

How to Change a Delta Bathroom Faucet

If your Delta bathroom faucet is leaking, dripping, or simply not working properly, it may be time to replace it. While this may seem like a daunting task, it is actually quite simple to do yourself with the right tools and materials. Here are the essential steps involved in changing a Delta bathroom faucet:

Essential Tools and Materials:

Adjustable wrench
Phillips screwdriver
Flat-head screwdriver
New Delta bathroom faucet
Plumber's putty
Teflon tape
Bucket

Step-by-Step Guide:

1. Prepare the Faucet:

Turn off the water supply to the bathroom faucet by closing the water valves located under the sink or in the basement. Open the faucet to release any remaining water in the lines.

2. Remove the Old Faucet:

Use the adjustable wrench to loosen the nuts connecting the faucet to the water supply lines. Be careful not to overtighten the nuts, as this can damage the lines. Once the nuts are loose, use the flat-head screwdriver to gently pry the faucet handles off. Locate the screws that hold the faucet in place and remove them using the Phillips screwdriver.

3. Install the New Faucet:

Apply a thin layer of plumber's putty around the base of the new faucet. This will help to create a watertight seal when the faucet is installed. Place the new faucet in the sink and tighten the mounting screws using the Phillips screwdriver. Connect the water supply lines to the faucet by hand-tightening the nuts. Do not overtighten the nuts, as this can damage the lines.

4. Wrap the Connections:

Wrap Teflon tape around the threads of the faucet connections. This will help to prevent leaks.

5. Turn on the Water Supply:

Slowly open the water valves under the sink to allow water to flow into the faucet. Check for leaks around the connections. If you notice any leaks, tighten the nuts or apply more Teflon tape as needed.

6. Adjust the Handles:

Adjust the faucet handles until the water flows smoothly and at the desired temperature. Tighten the handle screws to secure the handles in place.

7. Clean Up:

Use a damp cloth to wipe away any excess plumber's putty or water. Dispose of the old faucet and packaging.

Additional Tips:

If you are not comfortable working with plumbing, it is best to hire a professional plumber.
Be sure to purchase the correct size and type of faucet for your bathroom sink.
Follow the manufacturer's instructions for installation and maintenance.
Regularly clean and maintain your faucet to prevent leaks and extend its lifespan.