How To Change Mixer Tap On Bathroom Sink

The mixer tap is one of the most important parts of a bathroom sink. It controls the flow of water and allows you to adjust the temperature. If your mixer tap is broken or leaking, it is important to know how to change it. This article will provide you with a step-by-step guide on how to change a mixer tap on a bathroom sink.

Before you begin, you will need to gather the following tools and materials:

New mixer tap
Adjustable wrench
Phillips screwdriver
Flat-head screwdriver
Teflon tape
Plumber's putty

Once you have gathered your tools and materials, you can begin the process of changing the mixer tap. The first step is to turn off the water supply to the sink. You can do this by turning off the angle stop valves that are located under the sink. Once the water supply is turned off, you can begin to remove the old mixer tap.

To remove the old mixer tap, you will need to use an adjustable wrench to loosen the nuts that are holding it in place. Once the nuts are loosened, you can pull the old mixer tap out of the sink.

Once the old mixer tap is removed, you can begin to install the new mixer tap. The first step is to apply a layer of Teflon tape to the threads of the new mixer tap. This will help to prevent leaks. Once the Teflon tape is applied, you can insert the new mixer tap into the sink.

Next, you will need to tighten the nuts that are holding the new mixer tap in place. You can do this using an adjustable wrench. Once the nuts are tightened, you can turn on the water supply to the sink and check for leaks.

If there are no leaks, then you have successfully changed the mixer tap on your bathroom sink. Congratulations!