How To Change Seal In Bathroom Sink

How to Change Seal in Bathroom Sink

A leaky bathroom sink can be a nuisance, not to mention a waste of water. If the leak is coming from around the base of the sink, it's likely that the seal has worn out and needs to be replaced. Replacing the seal is a relatively simple job that can be done in a few minutes. Here are the steps on how to change seal in bathroom sink:

1. Gather your materials. You will need:

A new sink seal
A putty knife
A clean cloth

2. Turn off the water supply to the sink. There are usually two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water.

3. Disconnect the drain. Place a bucket under the sink to catch any water that may come out of the drain. Loosen the slip nut that holds the drain in place and remove the drain.

4. Remove the old seal. Use a putty knife to carefully remove the old seal from around the base of the sink. Be careful not to damage the sink or the countertop.

5. Clean the surface. Use a clean cloth to wipe away any residue from the old seal. The surface should be clean and dry before you apply the new seal.

6. Apply the new seal. Apply a bead of new seal around the base of the sink. Use your finger to smooth out the seal and make sure that it is evenly distributed.

7. Reinstall the drain. Replace the drain and tighten the slip nut.

8. Turn on the water supply. Open the shut-off valves under the sink to turn on the water. Check for leaks around the base of the sink. If there are any leaks, tighten the slip nut on the drain or apply more seal.

Replacing the seal in a bathroom sink is a simple job that can be done in a few minutes. By following these steps, you can prevent leaks and keep your bathroom looking its best.