How To Change The Bathroom Sink Stopper

A bathroom sink stopper is a small but important part of your sink. It helps to keep water in the sink when you need it and lets it out when you don't. If your sink stopper is not working properly, it can be a real nuisance. Fortunately, changing a sink stopper is a relatively easy task that you can do yourself. Here's how to do it:

Tools You'll Need

New sink stopper
Adjustable wrench
Pliers
Bucket

Step-by-Step Instructions

Turn off the water supply to the sink. This is usually done by turning the handles on the water shut-off valves located under the sink.
Open the drain. This will allow the water to drain out of the sink.
Place a bucket under the drain. This will catch any water that may leak out when you remove the stopper.
Use the adjustable wrench to loosen the nut that holds the stopper in place. The nut is usually located on the underside of the sink.
Remove the nut and the stopper. The stopper may be held in place by a washer. If so, remove the washer as well.
Clean the drain opening. Remove any debris that may be blocking the drain opening.
Insert the new stopper into the drain opening. Make sure that the stopper is seated properly.
Place the washer over the stopper.
Tighten the nut onto the stopper. Do not overtighten the nut.
Turn on the water supply to the sink.
Check for leaks. If there are any leaks, tighten the nut further.

Tips

If you are having difficulty removing the old stopper, you can try using pliers to grip the stopper and turn it.
If the drain opening is clogged, you can use a drain snake to clear the clog.
If you are not sure how to change the sink stopper, you can always call a plumber for help.

Conclusion

Changing a bathroom sink stopper is a simple task that you can do yourself. By following the steps in this guide, you can quickly and easily replace your old stopper with a new one.