How To Clean P Trap Bathroom Sink

How to Effortlessly Clean a P-Trap Bathroom Sink

Cleaning a P-trap bathroom sink is a quick and easy task that can help prevent clogs and keep your sink looking its best. Here's a step-by-step guide to help you get the job done:

Materials you'll need:

Adjustable wrench
Bucket
Old rag or towel
Dish soap
Toothbrush or small brush

Step 1: Turn off the water supply

Locate the water supply valves under the sink and turn them off. This will prevent water from flowing into the sink while you work.

Step 2: Disconnect the P-trap

Use the adjustable wrench to loosen the nuts that hold the P-trap in place. Be careful not to overtighten the nuts, as this could damage the trap.

Step 3: Remove the P-trap

Once the nuts are loose, you can remove the P-trap by pulling it straight down. Be sure to hold a bucket underneath to catch any water that may drain out.

Step 4: Clean the P-trap

Use the old rag or towel to wipe away any debris or hair that may be stuck in the P-trap. You can also use a toothbrush or small brush to clean the inside of the trap.

Step 5: Clean the sink drain

While the P-trap is removed, take the opportunity to clean the sink drain. Use a rag or towel to wipe away any debris or hair that may be stuck in the drain.

Step 6: Reassemble the P-trap

Once the P-trap and sink drain are clean, you can reassemble the P-trap. Be sure to tighten the nuts securely, but not too tightly.

Step 7: Turn on the water supply

Turn on the water supply valves under the sink and check for any leaks. If you see any leaks, tighten the nuts on the P-trap until the leaks stop.

Step 8: Clean the sink

Use a dish soap solution to clean the sink. Rinse the sink thoroughly with water and dry it with a clean towel.