How To Fit Freestanding Bath In Small Bathroom

Freestanding baths are a great way to add a touch of luxury to your bathroom. However, they can be tricky to fit into a small bathroom. In this article, we will discuss the essential aspects of fitting a freestanding bath in a small bathroom. We will cover everything from choosing the right size and shape to installing the bath and plumbing.

Choosing the Right Size and Shape

The first step is to choose the right size and shape for your bathroom. Freestanding baths come in a variety of sizes and shapes, so it is important to measure your bathroom carefully before you start shopping.

If you have a small bathroom, you will want to choose a bath that is not too large. A good rule of thumb is to leave at least 30 inches of space around the bath on all sides.

The shape of the bath is also important. A rectangular bath will take up less space than an oval or round bath.

Positioning the Bath

Once you have chosen the right size and shape for your bath, you need to decide where to position it in your bathroom. The best place for a freestanding bath is usually in the center of the room, but you may also want to consider placing it against a wall or in a corner.

When positioning the bath, it is important to make sure that it is level and that there is enough space around it to get in and out easily.

Installing the Bath

Installing a freestanding bath is a job that is best left to a professional. However, if you are confident in your DIY skills, you can follow these steps:

Prepare the floor by leveling it and adding a layer of plywood if necessary.
Place the bath in the desired location and level it.
Connect the plumbing to the bath.
Fill the bath with water to test for leaks.

Conclusion

Fitting a freestanding bath in a small bathroom can be a challenge, but it is possible. By following the tips in this article, you can choose the right size and shape for your bathroom, position the bath correctly, and install it safely and securely.