How To Fix A Leaky Faucet Ball Type Bathroom

### Main Content

Identifying the Handle Type:

* The first step is to identify the type of handle on your faucet. Ball-type handles are typically round or lever-shaped and operate by rotating or lifting a ball inside the faucet.

Tools and Materials:

* Gather the necessary tools and materials, including a screwdriver, wrench, pliers, replacement ball cartridge, and faucet lubricant.

Shutting Off the Water Supply:

* Locate the water supply valves under the sink or behind the bathroom wall. Turn both the hot and cold water valves clockwise to shut off the water supply.

Removing the Handle:

* Using the appropriate screwdriver, remove the screws securing the handle to the faucet. Pull the handle straight up to detach it.

Accessing the Ball Cartridge:

* Remove the cap or retainer on top of the faucet to access the ball cartridge. Use a wrench or pliers to unscrew the cartridge and pull it out.

Inspecting the Ball Cartridge:

* Examine the ball cartridge for any cracks, corrosion, or wear. Replace the cartridge if it shows any signs of damage.

Lubricating and Installing the New Cartridge:

* Apply faucet lubricant to the O-rings and threads of the new cartridge. Insert the cartridge into the faucet body and tighten it with a wrench or pliers.

Reattaching the Handle:

* Place the handle back on the faucet and secure it with the screws. Tighten the screws firmly but do not overtighten.

Reopening the Water Supply:

* Open the hot and cold water supply valves under the sink or behind the bathroom wall. Check for leaks around the faucet handle and base.

Troubleshooting:

* If the faucet still leaks after replacing the ball cartridge, check for other potential issues such as loose connections, damaged O-rings, or a worn faucet seat.