How To Fix A Single Lever Bathroom Tap

How to Fix a Single Lever Bathroom Tap

A single lever bathroom tap is a popular choice for modern bathrooms due to its sleek design and ease of use. However, like any plumbing fixture, it can sometimes develop problems that require repair. Here are the essential steps involved in fixing a single lever bathroom tap:

1. Identify the Problem

Before you begin any repairs, it is important to identify the specific problem with your tap. Common issues include:

Leaking from the base of the tap
Difficulty turning the lever
Reduced water flow
No water flow

2. Gather Tools and Materials

Once you have identified the problem, you will need to gather the necessary tools and materials for the repair. These may include:

Allen key or hex key
Phillips head screwdriver
Adjustable wrench
Replacement O-rings or washers
Plumber's putty

3. Turn Off the Water Supply

Before you begin any work on the tap, it is essential to turn off the water supply to the bathroom. This will prevent water from spraying everywhere when you remove the tap.

4. Remove the Tap Handle

To access the internal components of the tap, you will need to remove the handle. This is usually done by loosening an Allen screw or Phillips head screw located on the top of the handle.

5. Remove the Cartridge

Once the handle is removed, you will be able to access the cartridge. This is the core component of the tap that controls the flow and temperature of the water. To remove the cartridge, loosen the nut that secures it to the body of the tap.

6. Inspect and Clean the Cartridge

Once the cartridge is removed, inspect it for any damage or debris. If there are any O-rings or washers that appear worn or damaged, they should be replaced.

7. Reassemble the Tap

Once the cartridge has been cleaned or replaced, reassemble the tap in reverse order. Tighten the nut that secures the cartridge, replace the handle, and turn on the water supply.

8. Test the Tap

Once the tap has been reassembled, test it to ensure that it is working properly. Check for any leaks, and adjust the water flow and temperature as necessary.

Fixing a single lever bathroom tap can be a relatively simple task if you have the right tools and materials. By following these steps, you can restore your tap to proper working order in no time.