How To Fix A Stuck Bathroom Faucet Handle

A stuck bathroom faucet handle can be a frustrating problem, especially when you're in a hurry. But don't worry, it's usually a relatively easy fix that you can do yourself with a few simple tools. Here's a step-by-step guide on how to fix a stuck bathroom faucet handle:

1. Turn off the water supply:

The first step is to turn off the water supply to the faucet. This will prevent water from spraying everywhere when you remove the handle.
There are usually two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water.

2. Remove the handle:

Once the water is turned off, you can remove the handle. Most faucet handles are held in place by a small screw or nut.
Use a screwdriver or wrench to remove the screw or nut, then pull the handle straight up to remove it.

3. Inspect the handle:

Once the handle is removed, inspect it for any damage. If the handle is cracked or broken, you will need to replace it.
If the handle is not damaged, the problem may be with the cartridge. The cartridge is a small, cylindrical device that controls the flow of water through the faucet.

4. Replace the cartridge (if necessary):

If the cartridge is damaged, you will need to replace it. To do this, use a wrench to remove the nut that holds the cartridge in place.
Pull the cartridge straight up to remove it, then insert the new cartridge into the faucet body.
Tighten the nut to secure the cartridge in place.

5. Reassemble the faucet:

Once the cartridge is replaced (or if the handle was not damaged), reassemble the faucet by placing the handle back on the faucet body.
Tighten the screw or nut that holds the handle in place.
Turn on the water supply and check for leaks.
If there are no leaks, your faucet is now fixed!