How To Fix Leaky Pfister Bathroom Faucet

How to Fix a Leaky Pfister Bathroom Faucet

A leaky bathroom faucet can be a major annoyance, wasting water and driving up your utility bills. If you have a leaky Pfister bathroom faucet, don't despair. Fixing it is a relatively simple task that you can do yourself with a few basic tools. ### Tools and Materials You Will Need: * Phillips head screwdriver * Flat head screwdriver * Allen wrench (if applicable) * Replacement O-rings * Plumber's putty * Teflon tape ### Step-by-Step Instructions:

1. Shut Off the Water Supply

Before you begin working on the faucet, you need to shut off the water supply. There should be two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to shut off the water.

2. Remove the Handle

Use a Phillips head screwdriver to remove the handle on the leaky faucet. There may be a small cap covering the screw, which you can pry off with a flat head screwdriver. Once the screw is removed, pull the handle straight up to remove it.

3. Remove the Cartridge

Once the handle is removed, you will see a cartridge. This is the part of the faucet that controls the flow of water. Use an Allen wrench to loosen the screw holding the cartridge in place. If there is no Allen screw, you may need to use a flat head screwdriver to pry the cartridge out.

4. Inspect the Cartridge

Once the cartridge is removed, inspect it for any damage. If the O-rings are worn or damaged, they will need to be replaced. You can purchase replacement O-rings at most hardware stores.

5. Replace the O-Rings

If the O-rings are damaged, use a flat head screwdriver to carefully remove them. Apply a thin layer of plumber's putty to the new O-rings and press them into place.

6. Reinstall the Cartridge

Once the new O-rings are in place, reinstall the cartridge. Tighten the screw holding the cartridge in place, but do not overtighten it.

7. Wrap the Cartridge Threads with Teflon Tape

If the cartridge threads are not already wrapped with Teflon tape, apply a few wraps of tape to help create a watertight seal.

8. Reinstall the Handle

Place the handle back on the faucet and tighten the screw. Be careful not to overtighten the screw, as this could damage the handle.

9. Turn the Water Supply Back On

Once the handle is reinstalled, turn the water supply back on. Check for any leaks around the faucet. If there are no leaks, you have successfully fixed your Pfister bathroom faucet. ### Tips: * If you are not comfortable working on your own plumbing, you can always call a plumber to fix the leak for you. * If you have a Pfister faucet with a lifetime warranty, you may be able to get the parts you need for free. * Regular maintenance can help prevent leaks. Periodically check your faucet for any loose screws or worn O-rings and replace them as needed.