How To Fix Moen Bathroom Sink Handle

By | November 30, 2020

How to Repair a Moen Bathroom Sink Handle

Moen is a well-known brand for bathroom fixtures, including sinks and faucets. While Moen products are generally durable and reliable, occasional issues may arise, such as a faulty sink handle. If you're facing a malfunctioning Moen bathroom sink handle, don't despair. This guide will provide you with a step-by-step process to help you fix it.

Tools and Materials You'll Need:

  • Adjustable wrench or pliers
  • Allen wrench
  • Silicone grease or petroleum jelly
  • Replacement handle (if necessary)

Step-by-Step Guide to Fix a Moen Bathroom Sink Handle:

1. Turn Off the Water Supply:

Before you start working on the handle, turn off the water supply to the sink. You'll typically find two shut-off valves under the sink, one for hot water and one for cold water. Turn them clockwise to close them.

2. Remove the Handle Screw:

Locate the handle screw, which is usually found in the center of the handle. Use an Allen wrench or small hex key to loosen and remove the screw.

3. Pull Off the Handle:

Once the screw is removed, gently pull the handle straight up and off the faucet body.

4. Inspect the Cartridge:

With the handle removed, you'll see the cartridge, which is the core component of the faucet. Check for any visible damage, debris, or corrosion on the cartridge.

5. Clean or Replace the Cartridge:

If the cartridge is dirty or damaged, you may need to clean or replace it. To clean the cartridge, wipe it down with a damp cloth and apply some silicone grease or petroleum jelly to the O-rings. If the cartridge is damaged, you'll need to replace it with a new one.

6. Reinstall the Handle:

Once the cartridge is cleaned or replaced, slide the handle back onto the faucet body. Tighten the handle screw using an Allen wrench.

7. Turn On the Water Supply and Test:

Turn the water supply valves back on and check if the handle operates smoothly. If there are any leaks or the handle still doesn't work properly, you may need to adjust the cartridge or replace the handle.

Additional Tips:

If you're replacing the handle, make sure to choose a compatible model that fits your Moen faucet.

Applying silicone grease or petroleum jelly to the O-rings on the cartridge and handle can help prevent future leaks.

If you're facing any difficulties or the issue persists, it's recommended to contact a licensed plumber for professional assistance.

Remember to always wear safety glasses when working with plumbing fixtures.


Loose Lever On Moen Brantford Faucet

Tighten A Loose Lever On Moen Brantford Faucet

Remove Moen Bathroom Faucet Handle

How To Remove Moen Bathroom Faucet Handle In 2 Steps

Moen 4570 Handle Fell Off But Then I

Moen 4570 Handle Fell Off But Then I Fixed It Here S How

Moen Bathroom Faucet Cartridge

How Do I Replace My Moen Bathroom Faucet Cartridge

Replace Repair A Leaky Moen Cartridge

How To Replace Repair A Leaky Moen Cartridge In Bathroom Set Of Faucets Single Lever Tips

Moen Faucet Handle Keeps Twisting Out

Moen Faucet Handle Keeps Twisting Out Of Position

How To Fix Moen Single Handle Faucets

How To Fix Moen Single Handle Faucets

How To Fix Moen Single Handle Faucets

How To Fix Moen Single Handle Faucets

Moen Faucet Handle Keeps Twisting Out

Moen Faucet Handle Keeps Twisting Out Of Position

How To Remove Moen Bathroom Sink Faucet

How To Remove Moen Bathroom Sink Faucet Handles Mr Kitchen Faucets

Leave a Reply

Your email address will not be published. Required fields are marked *