How To Install A New Bathroom Sink Drain

How to Install a New Bathroom Sink Drain

Noun. "Drain" is a noun in this context, referring to the pipe that carries water away from the sink. The essential aspects of installing a new bathroom sink drain include: * Choosing the right drain * Removing the old drain * Installing the new drain * Caulking around the drain This article will focus on each of these essential aspects, providing step-by-step instructions and tips to help you complete the job successfully. ### Choosing the Right Drain When choosing a new bathroom sink drain, there are a few things to keep in mind: *

The size of the drain hole:

The drain hole in your sink will determine the size of drain you need. Most bathroom sinks have a 1-1/2 inch drain hole, but some sinks may have a 1-1/4 inch drain hole. *

The type of sink:

There are two main types of bathroom sinks: drop-in sinks and undermount sinks. Drop-in sinks have a lip that rests on the countertop, while undermount sinks are mounted beneath the countertop. The type of sink you have will determine the type of drain you need. *

The finish of the drain:

Drains come in a variety of finishes, including chrome, brushed nickel, and oil-rubbed bronze. Choose a finish that matches the other fixtures in your bathroom. ### Removing the Old Drain Once you have chosen a new drain, you can remove the old drain. To do this, you will need a pair of pliers and a screwdriver. 1. Turn off the water supply to the sink. 2. Place a bucket under the sink to catch any water that may leak out. 3. Use the pliers to loosen the slip nut that holds the drain in place. 4. Once the slip nut is loose, you can unscrew the drain by hand. ### Installing the New Drain Once you have removed the old drain, you can install the new drain. To do this, you will need a pair of pliers and a screwdriver. 1. Apply a bead of silicone caulk around the base of the new drain. 2. Screw the new drain into the drain hole by hand. 3. Tighten the slip nut using the pliers. 4. Turn on the water supply to the sink and check for leaks. ### Caulking Around the Drain Once the new drain is installed, you should caulk around it to prevent leaks. To do this, you will need a tube of silicone caulk and a caulk gun. 1. Cut the tip of the caulk tube at a 45-degree angle. 2. Load the caulk gun with the tube of caulk. 3. Apply a bead of caulk around the base of the drain. 4. Smooth the caulk with your finger. Allow the caulk to dry completely before using the sink.