How To Install Bathroom Tub Faucet

How to Install a Bathroom Tub Faucet

Installing a new bathroom tub faucet is a relatively easy project that can be completed in a few hours. By following these step-by-step instructions, you can easily update the look of your bathroom and enjoy a more comfortable and efficient bathing experience.

Materials and Tools You'll Need:

New tub faucet
Wrench
Adjustable wrench
Plumber's putty
Teflon tape
Screwdriver
Flashlight

Step-by-Step Instructions:

Turn off the water supply: Locate the water shut-off valves beneath the sink or behind the access panel in the bathroom and turn them off to prevent water from flowing during the installation process.
Remove the old faucet: Use a wrench to loosen the nuts securing the old faucet to the tub. Disconnect the water supply lines from the old faucet and remove it completely.
Prepare the tub surface: Clean the surface where the new faucet will be installed using a damp cloth. Apply a bead of plumber's putty around the base of the faucet to create a watertight seal.
Install the faucet: Carefully place the new faucet into the hole in the tub and secure it with the mounting nuts. Ensure that the faucet is level and tight, but avoid overtightening.
Connect the water supply lines: Wrap a few layers of Teflon tape around the threads of the water supply lines and connect them to the corresponding ports on the faucet. Use an adjustable wrench to tighten the connections.
Install the handles: Attach the handles to the faucet body using the provided screws or bolts. Ensure that the handles are facing in the correct direction and are securely tightened.
Check for leaks: Turn on the water supply and check for any leaks. If there are leaks, tighten the connections until the water stops flowing.

Additional Tips:

If you are replacing an old faucet with a waterfall style faucet, ensure that the tub is designed for this type of installation.
Use a flashlight to inspect the underside of the tub and ensure that there are no loose connections or potential leak points.
Apply a small amount of petroleum jelly to the O-rings on the water supply lines to prevent them from drying out.
If you are not comfortable installing the faucet yourself, contact a licensed plumber for assistance.

By following these instructions, you can successfully install a new bathroom tub faucet and enjoy a refreshing and updated bathing experience.