How To Reattach Drain Plug In Bathroom Sink

How to Reattach Drain Plug in Bathroom Sink

The bathroom sink drain plug is an essential aspect of any bathroom. It helps to keep the water in the sink and prevents it from draining out. If the plug is not properly attached, it can leak or even fall out altogether. Reattaching a drain plug is a simple task that can be done in a few minutes.

There are two main types of drain plugs: pop-up plugs and lift-and-turn plugs. Pop-up plugs are the most common type and are typically made of rubber or plastic. Lift-and-turn plugs are less common and are typically made of metal. The type of drain plug you have will determine how you are reattaching it.

Reattaching a Pop-Up Drain Plug

Remove the old drain plug. To do this, simply lift the stopper up and out of the drain hole.
Clean the drain hole. Use a damp cloth to wipe away any dirt or debris from the drain hole.
Apply a small amount of petroleum jelly to the bottom of the new drain plug. This will help to create a seal and prevent the plug from leaking.
Insert the new drain plug into the drain hole. Press down on the plug until it is firmly in place.
Test the drain plug. Run some water into the sink and make sure that the plug is not leaking.

Reattaching a Lift-and-Turn Drain Plug

Remove the old drain plug. To do this, turn the plug counterclockwise until it is loose. Then, lift the plug up and out of the drain hole.
Clean the drain hole. Use a damp cloth to wipe away any dirt or debris from the drain hole.
Apply a small amount of petroleum jelly to the threads of the new drain plug. This will help to create a seal and prevent the plug from leaking.
Insert the new drain plug into the drain hole. Turn the plug clockwise until it is hand-tight.
Test the drain plug. Run some water into the sink and make sure that the plug is not leaking.

Reattaching a drain plug is a simple task that can be done in a few minutes. By following the steps above, you can easily fix a leaking or loose drain plug.