How To Remove A Moen Bathroom Sink Faucet Handle

How to Remove a Moen Bathroom Sink Faucet Handle

Removing a Moen bathroom sink faucet handle is a simple task that can be completed by most homeowners in a matter of minutes. By following these simple steps, you can easily remove the handle to troubleshoot the faucet, replace it with a new one, or clean the handle itself.

Gather your tools

Before you begin, gather the following tools:

Phillips head screwdriver
Allen wrench (if applicable)
Soft cloth

Turn off the water supply

Before you remove the faucet handle, you must turn off the water supply to the faucet. To do this, locate the shut-off valves beneath the sink and turn them clockwise to the closed position.

Remove the aerator

If your faucet has an aerator, it should be located at the end of the faucet spout. Use a soft cloth to unscrew the aerator and set it aside.

Remove the cap

Locate the cap on the top of the faucet handle. This cap may be made of plastic or metal, and it may have a small screw in the center. Use a screwdriver to remove the screw, if necessary, and then lift the cap off.

Remove the handle

Once the cap is removed, you will see a screw or Allen screw holding the handle in place. Use the appropriate tool to loosen the screw, and then pull the handle straight up to remove it from the faucet.

Troubleshooting

If you are unable to remove the faucet handle after following these steps, there may be an underlying problem with the faucet. Check for any loose or damaged parts, and call a plumber if necessary.

Tips

When replacing a faucet handle, it is important to use the correct type of handle for your faucet. Moen faucets use two different types of handles: lever handles and cross handles. Lever handles are typically used on single-handle faucets, while cross handles are used on two-handle faucets.

If you are unsure of which type of handle to use, consult the faucet manufacturer's instructions.