How To Remove An Old American Standard Bathroom Faucet

Replacing an old American Standard bathroom faucet can be a straightforward task that requires minimal plumbing skills and a few basic tools. Whether you're tackling this project as part of a bathroom renovation or simply want to update your fixtures, here's a detailed guide to help you remove your old American Standard bathroom faucet efficiently and safely.

1. Gather Necessary Tools and Materials:

Before you begin, ensure you have the following tools and materials at hand:

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Bucket or basin
Old towels or rags
Safety goggles
New American Standard bathroom faucet
Plumber's putty (if needed)

2. Turn Off Water Supply:

Locate the water supply valves under your sink or behind the access panel. Turn off both the hot and cold water valves to prevent water from flowing while you work.

3. Disconnect Supply Lines:

Use the adjustable wrench to loosen the nuts connecting the supply lines to the faucet. Place the bucket or basin underneath to catch any dripping water. Once the nuts are loose, detach the supply lines from the faucet.

4. Remove Handle and Trim Plate:

With the Phillips head screwdriver, unscrew the set screws securing the handle to the faucet body. Remove the handle carefully. Next, use the flat head screwdriver to pry off the trim plate around the faucet base.

5. Disconnect Drain Lines:

If your faucet has a pop-up drain assembly, you'll need to disconnect the drain lines. Locate the drain line nuts underneath the sink and use the adjustable wrench to loosen them. Detach the drain lines from the drain assembly.

6. Unscrew Faucet Mounting Nuts:

Underneath the sink, locate the mounting nuts that secure the faucet to the countertop or sink. Use the adjustable wrench to loosen and remove these nuts.

7. Remove Old Faucet:

With the mounting nuts removed, you should be able to lift the old faucet out from the countertop or sink. Be careful not to drop any parts into the drain.

8. Clean the Area:

Use a damp cloth or sponge to clean the area where the old faucet was installed. Remove any remaining residue or debris.

9. Install the New Faucet:

Follow the instructions provided with your new American Standard bathroom faucet to install it properly. This may involve applying plumber's putty to the base of the faucet, connecting the supply lines, and securing the faucet with the mounting nuts. Once the new faucet is in place, turn on the water supply and check for leaks.

Conclusion:

Removing an old American Standard bathroom faucet is a relatively simple task that can be completed with basic tools and materials. By following these steps carefully, you can successfully remove your old faucet and install a new one, giving your bathroom a refreshed and updated look.