How To Remove And Install A Drop In Bathroom Sink Drain

How To Remove And Install A
Drop In Bathroom Sink Drain

There are a few essential aspects to keep in mind when removing and installing a drop-in bathroom sink drain. These aspects include the type of drain, the size of the drain, the condition of the drain, and the tools needed to remove and install the drain. By considering these aspects, you can ensure that the drain is removed and installed correctly, and that it will function properly.

In this article, we will discuss the essential aspects of removing and installing a drop-in bathroom sink drain in more detail. We will also provide step-by-step instructions on how to remove and install a drop-in bathroom sink drain.

## Essential Aspects ### Type of Drain The first step in removing and installing a drop-in bathroom sink drain is to determine the type of drain. There are two main types of drop-in bathroom sink drains: grid drains and pop-up drains. *

Grid drains

have a grid-like surface that allows water to flow through while blocking debris. Grid drains are typically made of metal or plastic. *

Pop-up drains

have a stopper that can be lifted or lowered to open or close the drain. Pop-up drains are typically made of metal or plastic. ### Size of the Drain The next step is to determine the size of the drain. Drain size is measured in inches, and the most common drain sizes are 1-1/2 inches and 1-3/4 inches. You can measure the drain by measuring the diameter of the drain opening. ### Condition of the Drain Once you have determined the type and size of the drain, you need to inspect the condition of the drain. If the drain is cracked, corroded, or otherwise damaged, it will need to be replaced. ### Tools Needed The following tools are needed to remove and install a drop-in bathroom sink drain: * Adjustable wrench * Plumber's putty * Utility knife * Screwdriver ## Step-by-Step Instructions ### Removing a Drop-In Bathroom Sink Drain 1. Place a bucket under the sink to catch any water that may spill out. 2. Use an adjustable wrench to loosen the drain nut. 3. Carefully remove the drain nut and lift the drain out of the sink. 4. Clean the drain hole and the underside of the sink around the drain hole. ### Installing a Drop-In Bathroom Sink Drain 1. Apply a bead of plumber's putty to the underside of the drain flange. 2. Insert the drain into the drain hole and tighten the drain nut by hand. 3. Use an adjustable wrench to further tighten the drain nut. Do not overtighten the drain nut. 4. Use a utility knife to trim any excess plumber's putty around the drain flange. 5. Run water into the sink to test the drain. ## Conclusion By following these essential aspects and step-by-step instructions, you can remove and install a drop-in bathroom sink drain easily and quickly.