How To Remove And Replace Bathroom Tile Grout

How to Remove and Replace Bathroom Tile Grout

Bathroom tile grout can become discoloured, cracked, or mouldy over time, detracting from the overall appearance of your bathroom. Replacing the grout is a relatively simple DIY project that can restore your bathroom to its former glory. Here's a step-by-step guide to help you remove and replace bathroom tile grout:

Materials you'll need:

Grout remover
Grout float or squeegee
Scraper or utility knife
BucketSponge
New grout
Grout sealer

Step 1: Prepare the area

Clear the bathroom of any obstacles and remove any fixtures or accessories that could interfere with your work. Cover the floor and other surfaces with plastic or a drop cloth to protect them from grout and cleaning solutions.

Step 2: Remove the old grout

Apply the grout remover according to the manufacturer's instructions. Let it sit for the recommended amount of time, then use the grout float or squeegee to scrape away as much of the old grout as possible. For stubborn grout, you may need to use a scraper or utility knife to carefully chip it away.

Step 3: Clean the area

Once the old grout has been removed, thoroughly clean the tiles and joints with a sponge and water. Rinse the area several times to remove any remaining grout or cleaning solution.

Step 4: Mix the new grout

Mix the new grout according to the manufacturer's instructions. The consistency should be like peanut butter, not too wet or too dry.

Step 5: Apply the new grout

Using the grout float or squeegee, apply the grout to the joints between the tiles, working in small sections at a time. Press the grout firmly into the joints, making sure to fill them completely.

Step 6: Remove excess grout

Once you have applied the grout, use the grout float or squeegee to remove any excess grout from the tiles. Wipe the tiles with a damp sponge to remove any remaining grout residue.

Step 7: Seal the grout

Once the grout has completely dried, apply a grout sealer according to the manufacturer's instructions. The sealer will help to protect the grout from moisture and stains.

Tips for success:

Always test the grout remover in an inconspicuous area before applying it to the entire surface.
Work in small sections to prevent the grout from drying out too quickly.
Don't overwork the grout, as this can weaken it.
Allow the grout to dry completely before sealing it.

By following these steps, you can successfully remove and replace bathroom tile grout, giving your bathroom a fresh and updated look.