How To Remove Moen Bathroom Sink Faucet Cartridge

Removing a Moen bathroom sink faucet cartridge is a relatively simple task that can be completed in a few minutes. By understanding the essential steps of the process, you can avoid potential damage to the faucet or your sink.

The first step is to turn off the water supply to the faucet. There are typically two shut-off valves located under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to close them.

Once the water supply is shut off, remove the aerator from the faucet. The aerator is the small, screened attachment at the end of the faucet spout. It can usually be unscrewed by hand or with a pair of pliers.

With the aerator removed, you will see a small cap in the center of the faucet. This cap is usually made of plastic or metal and is held in place by a screw. Use a screwdriver to remove the screw and then lift off the cap.

Once the cap is removed, you will see the cartridge. The cartridge is a cylindrical-shaped component that contains the internal parts of the faucet. Grip the cartridge firmly and pull it straight up to remove it from the faucet.

With the cartridge removed, you can now inspect it for any damage or wear. If the cartridge is damaged, it will need to be replaced. New cartridges can be purchased at most hardware stores or online.

To install the new cartridge, simply insert it into the faucet body and push it down until it snaps into place. Replace the cap and screw, and then reattach the aerator. Turn on the water supply and check for any leaks.

Removing a Moen bathroom sink faucet cartridge is a simple task that can be completed in a few minutes. By following these steps, you can avoid potential damage to the faucet or your sink.