How To Repair A Chip In Bathroom Sink Drainer

How to Repair a Chip in a Bathroom Sink Drainer

If you've ever dropped a heavy object into your bathroom sink, you know that it can chip the enamel or porcelain. This can be a frustrating sight, especially if the sink is new. The good news is that chipped bathroom sink drainers can be repaired with relative ease. With the right tools and materials, you can repair a chip in your bathroom sink drainer in just a few hours. Here's a step-by-step guide to help you get the job done:

Materials:

* Epoxy repair kit * Sandpaper (120-grit and 220-grit) * Painter's tape * Acetone * Clean cloths

Instructions:

1. Clean the area:

* Begin by thoroughly cleaning the chipped area with acetone and a clean cloth. This will remove any dirt, grease, or debris that could interfere with the repair.

2. Protect the surrounding area:

* Apply painter's tape to the surrounding area of the chip to protect it from epoxy.

3. Sand the chipped area:

* Lightly sand the chipped area with 120-grit sandpaper to roughen the surface and create a bond for the epoxy.

4. Mix the epoxy:

* Follow the manufacturer's instructions to mix the epoxy resin and hardener. Wear gloves and mix thoroughly.

5. Apply the epoxy:

* Apply a small amount of epoxy to the chipped area using a toothpick or paintbrush. Smooth the epoxy out with a clean cloth or your fingertip.

6. Let the epoxy cure:

* Allow the epoxy to cure according to the manufacturer's instructions. This may take several hours or even overnight.

7. Sand and polish the repaired area:

* Once the epoxy has cured, sand the repaired area with 220-grit sandpaper to smooth it out. Then, polish the area with a soft cloth and a mild polishing compound.

8. Remove the painter's tape:

* Carefully remove the painter's tape from the surrounding area.

9. Clean the sink:

* Clean the entire sink with a mild detergent and water to remove any remaining debris.

Tips:

* Use a color-matched epoxy repair kit for the best results. * If the chip is large, you may need to use a piece of wire mesh or metal screen to reinforce the repair. * Be patient and allow the epoxy to cure fully before using the sink. * If you're not comfortable performing this repair yourself, you can contact a professional plumber for assistance. By following these steps, you can repair a chip in your bathroom sink drainer and restore its original appearance. With a little bit of effort, you can keep your sink looking its best for years to come.